History and other interesting information regarding the precision, hand-built Colortran Mini-Crab Dolly. The Mini-Crab Dolly was invented by television/film actor, William Sargent. Joining Mr. Sargent was actor/director, Robert Kelljan and together they teamed up as SarKell.
If you're the owner of a Mini-Crab Dolly, register your dolly today and become a member of the exclusive SarKell Society.
If purchasing a Mini-Crab Dolly or you're moving a Mini-Crab Dolly out-of-state, here's some ideas.
Before the new owner, Steven Mahoney, arrived to buy #157, he had prearranged a freight company to transport the dolly back to Steven's hometown in the Seattle area. The cost was surprisingly low, about $225.00! Not bad for 300+ pounds of weight!
We transferred the dolly onto a wood pallet. Once on the pallet, we applied the dolly's two brakes to stop any movement. It also helped, as you can see, the wheels of the dolly fell into the pallet-slots for a cradled fit. The bungee cord you see was only to hold the push bar in place (not the dolly!).
Steven took this shot of me and #157 at the shipping dock with his iPhone. If you have any questions about shipping a Mini-Crab, please e-mail me and I will forward your questions onto Steven Mahoney, who is an expert with shipping large items.
Recently, as I'm preparing to transfer ownership of Dolly #157, I've taken the lower panel off to do a final 'lube-job' on #157's chain and gears. Essentially, I'm preparing the dolly for its new owner, Steven Mahoney.
Please note, when performing any maintenance below the deck, and you're planning on flipping your Mini-Crab over, be sure to position the wheels as shown above (in full-crab mode). This provides the least amount of stress on the wheels/trucks. It also helps to have a good amount of foam underneath as to not inflict damage to the aluminum wall.
When oiling your Mini-Crab, use a lubricant to oil all the gears and lightly oil the entire chain. Don't try to spray everything in sight, then end up having lubricant dripping everywhere. In fact, if you get overspray onto the aluminum undercarriage, I would recommend wiping it off as quickly as possible. Otherwise, some lubricants can have a tattoo effect on the aluminum. Click on any image to enlarge, once enlarged, click again to super enlarge.
Also, it doesn't hurt to lubricate all bolts, Allen screws, strap screws, etc., to keep them from rusting. Remember, some of these dollies are approaching 50 years old, so they will need a little extra TLC.
I'm still quite fascinated on the design and build quality of this dolly. The inventor, William Sargent, is to say the least...a mechanical wizard! No one but Sargent could have pulled-off this sophisticated yet 'portable' design.
Take a look at the above image...you're really looking at perfect harmony! Compact hydraulics, 360-degree crab steering, precision bearings and gears all self-contained inside an aluminum shell that was designed some 50 years ago. Way ahead of its time! My hats off to you, Mr. Sargent!
Keeping the Well for the hydraulic lift clean from oxidation and the build-up of old grease helps with easier installation and removal of the hydraulic lift when needed. At almost 1" thick, the Well area has the thickest concentration of solid-aluminum on the dolly. Once the Well is clean and shiny, I'll apply a thin layer of grease inside. I will also put a thin layer of grease on the hydraulic lift. The white nylon blocks you see here are the brakes that you apply against the hydraulic lift once it's in-place inside the Well.
Lightly lubricate the entire chain. Remember...once a chain gets rusty...it's worthless. Lightly lubricate all gears and other metal items. Originally, I thought there were only 2-factory stampings of the serial number #157. Well, lo and behold, I found a third #157 stamping that's on the bottom of the Well for the hydraulic lift.
So this dolly has a total of 3-factory stampings of the serial number and 4 if you're counting the DL Wolper ownership stamp. I haven't seen this many stampings on one particular item since admiring a vintage Luger pistol, where every piece imaginable on a Luger is stamped!
If you have any questions on maintaining your Mini-Crab Dolly, just e-mail me at:
I've been meaning to write about #157's previous owners for more than a year now, especially the most famous one of all, David L. Wolper.
Soon after purchasing #157, I was quite surprised when I removed the bottom panel for the very first time. Hidden beneath years of oxidation on the panel was the stamped name of D. L. Wolper.
At first glance, I didn't recognize his nameuntil I did some research. I quickly recalled that Mr. Wolper was one of the most accomplished Hollywood and TV producers of our time. According to his site, Mr. Wolper won a total of 2-Academy Awards (Oscars), 50-Emmy's and 5-Peabody Awards. Undoubtedly, one of the most celebrated producers of all time.
Needless to say, as a filmmaker myself, it's an honor to have had in my possession, one of Mr. Wolper's pieces of equipment. To me, it's like having one of Ansel Adams' Hasselblad cameras. You can see more of Mr. Wolper's work at:
www.imdb.com/name/nm0938678/ Some images of the DLWolper stamping before cleaning it. It's quite possible the stampings were done at the ColorTran factory in Burbank. After using a little rubbing compound, I was able to clean many years of oxidation off the stamping. As you can see, the stamping is more legible.
Tip...If you own a ColorTran Mini-Crab, be sure to check the inside of the bottom panel for any stampings. You'll have to look hard as it may be under years of oxidation.
During the conversation I once had with the former president of Berkey-ColorTran, I was told that a handful of famous filmmakers purchased the Mini-Crab soon after its release. I know two of which for sure, Francis Ford Coppola and David L. Wolper. Who knows...with only around 200 or so of these dollies being built, it's quite possible you too may have a famous 'Hollywood' dolly! Check your dolly and let me know what you find!
The famous #157 Mini-Crab, which was once owned by a Academy Award-winning producer, David L. Wolper, will soon have a new home in the Seattle, Washington area!
The ColorTran Mini-Crab Dolly that's pictured above and throughout this Blog was first purchased and owned by Oscar winning-producer, David L. Wolper. Presently, #157 is under negotiations to be purchased by Steven Mahoney, a filmmaker from the Seattle area.
If all goes well, Mini-Crab #157 will be going to it's new home sometime in mid-October. Incidentally, there will be a total of two Mini-Crab's living in that area as our good friend and blog contributor, Steven Bradford, caretaker of Mini-Crab #34 also hails from the Seattle area. More information will be forthcoming regarding Steven Mahoney's plans in using #157 and what type of film project he will be using the Mini-Crab for.
I'm also hopeful that Mr. Mahoney will be able to further research and document if #157 was used by it's first owner, David L. Wolper in making 'Roots', 'North and South' or the original 'Willy Wonka and the Chocolate Factory' movies. There's a good chance that #157 was in fact used in these productions...if it was...this dolly is even more cool!
Sarkell Society will soon be welcoming it's newest member...Leif Peterson, who is the owner of HCD #118 (tag-photo above). More photo's of both Leif and his Mini-Crab will be forthcoming. Leif will become Sarkell Society Member # 11.
Welcome aboard, Leif!
Remember, if you're the owner/user of a ColorTran Mini-Crab Dolly...become a member of the Sarkell Society by registering today! For membership information, see archived blog-post from September 3, 2010.
This is the September 1966 issue of AC debuting the ColorTran Mini-Crab Dolly. My apologies, but the AC issues of the 1960's were over sized and cannot be easily scanned into a standard format. I will work on getting the entire article scanned and will post when finished. That's Mini-Crab inventor William Sargent, pushing the dolly with his partner Robert Kelljan peering through the BNC viewfinder. More to follow as there were a total of four pages of this very interesting AC story. Click on any image to enlarge content.
Speaking in terms of dolly sizes....here's one that may have been the largest 'pushable' dolly ever used. This one and three like it were part of the dolly inventory at Universal Studios back in 1943. As you can see, it can hold a BNC camera, a collection of lights, and practically the whole crew!
Thanks to my very good friend and Blog contributor, Rudy Goldberg of Beverly Hills, California for sending this rare image to us.
Pictured here is one the best directors of all time, 'Hitch', standing next to what the grip crew dubbed the 'car-dolly'. According to Rudy, it took about 10-people to push this monster. All but one of these dollies still exists and can be found today inside one of Universal's sound stages.
Thanks for the 'inside-story' Rudy!
If you have stories or photos of using a dolly, especially our favorite and this Blog's namesake...the ColorTran Mini-Crab Dolly...please send them in! We would love to share them with other dolly enthusiasts.
As always...click on this or any image to enlarge.
If purchasing a Mini-Crab Dolly or you're moving a Mini-Crab Dolly out-of-state, here's some ideas.
Steven took this shot of me and #157 at the shipping dock with his iPhone. If you have any questions about shipping a Mini-Crab, please e-mail me and I will forward your questions onto Steven Mahoney, who is an expert with shipping large items.
